Dropping a phone in water is a situation no one wants to encounter. If your phone accidentally falls into the water, what should you do to prevent your beloved phone from being badly damaged. Here are some tips to help you quickly handle when your phone is dropped in water.
How to handle phone when dropped in water:
- Turn off the phone as soon as you take it out of the water:
The first thing you need to do is get your phone out of the water right then and there. You should remember that when taking the device out in the water, hold the device vertically, the direction with the connection ports downwards so that the water that has entered the machine can run out, this to avoid the situation of running water. back into the machine.
The next important thing is to turn off the machine. This will prevent water from flowing into the motherboard of the machine while the machine is operating, causing circuit failure. If you are in a situation where the phone is turning, you need to unplug the charger first to avoid electric shock.
- Let’s disassemble the phone:
If you know how, remove the back cover and remove the battery from the phone immediately, then dry the battery with a towel and let it dry in a cool, dry place (this happens with phones with removable battery).
Remove the accessories that come with the device such as memory cards, sim cards.
- Dry treatment of the outside of the phone
For normal water, you should use a soft cloth to dry the entire outer surface of the phone. Then take a low absorbent item such as cotton to be able to dry the connection ports, headphone ports, charging ports and phone accessories.
For liquids that are not like normal water (soft water, salt water, beer, …) these liquids are very abrasive to the phone, so you need to quickly handle wiping the phone with damp cloth to treat water and prevent the phone from corroding that can cause. Then take a dry cloth to clean the phone again.
- Dehumidify the phone
After you have handled the dry part for your phone and other devices in the phone, you should dehumidify your phone. There are many ways to handle dehumidification for the machine.
The first is the easiest way to manipulate it is to put the phone in rice to absorb moisture, cover the phone with a layer of rice, then leave it for 1-2 days and then take it out. You should be careful not to get small grains of rice stuck into the phone’s connection ports.
The second way you can put your phone in a silica gel desiccant bag for 1-2 days.
Third, you can also take a dryer to dry each crevice of the phone, so that the device is drier.
You should note that when handling the phone in water, do not expose the phone to the sun, because high temperatures will damage the internal components of the device.
Another important issue is that you should wait patiently during the process of processing the device into the water, when performing the drying stages, you should wait for your phone to dry before you should put it in the water. In use, to avoid the situation that the phone is still not completely dry, using the device right away will affect the durability of the device.
- Restart your device and try it out
After you have done the above steps, please attach the battery to the device (for removable batteries) or plug in the charger for a while and then turn on the power to see if the phone is still working properly.
There are some notes when you use cotton swabs, cotton towels to wipe the phone
Drying the phone and its ports with cotton towels and cotton swabs is used by many people. However, cotton shards when soaked in water can get trapped inside the phone causing damage to the internal components. Therefore, you should be very careful when handling this situation.
Above are some ways to handle when your phone is not dropped into the water, please calm down and handle it carefully according to the instructions. Good luck.
